 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| to : specification of fujitsu tft-lcd module FLC38XGC6V-06 approval this product is designed, developed and manufactured as contemplated for general use, including without limitation, general office use, personal use, household use, and ordinary industrial use, but is not designed, developed and manufactured as contemplated for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could lead directly to death, personal injury, severe physical damage or other loss (hereinafter ?high safety required use?), including without limitation, nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system. if customer?s product possibly falls under the category of high safety required use, please consult with our sales representatives in charge before such use. in addition, fujitsu shall not be liable against the customer and/or any third party for any claims or damages arising in connection with the high safety required use of the product without permission . specification no. : tech bes lcd-00050 issue date : oct. 30, 2001 issued by : t. naka director lcd design dep. lcd technology div. lcd group fujitsu limited date by
? 2 FLC38XGC6V-06 3 1 edit date appr. check desig. description cust. ccc c ccc ccc c ccc ccc c ccc ccc c ccc c c c c ccc c c c c ccc c c c c ccc c c c c ccc / date document control section :? d d e f b a desig. check appr. FLC38XGC6V-06 tech bes lcd-00050 :? 2 3 4 a b c c revision history revision date prepared checked approved summary 01a sep.26,2000 m.miyahara m.fukuhara t.naka 1st issue 02b jul.06,2001 m.miyahara m.fukuhara t.mine mura t.naka change connection method to acf, color filter, and position of gasket. apply to na19020-c281. 02b oct.30,2001 m.miyahara m.fukuhara t.mine mura t.naka add acf to connection method, change color filter. apply to na19020- c281 only. 20000926 miyahara fukuhara 02 20001117 miyahara fukuhara revised p3 03 20010109 miyahara fukuhara revised p22,24 04 20010706 miyahara fukuhara minemura revised p2,8,27,29-32 05 20011030 miyahara fukuhara minemura revised p1,31 ? 2 FLC38XGC6V-06 3 2 edit date appr. check desig. description cust. ccc c ccc ccc c ccc ccc c ccc ccc c ccc c c c c ccc c c c c ccc c c c c ccc c c c c ccc / date document control section :? d d e f b a desig. check appr. FLC38XGC6V-06 tech bes lcd-00050 :? 2 3 4 a b c c table of contents 1. applications ............................................................................................................ 3 2. product name and model number 2-1.product name ........................................................................................................... 3 2-2.model name .............................................................................................................. 3 3. overview.................................................................................................................... 3 4. configuration........................................................................................................ 3 5. mechanical specifications............................................................................. 4 6. absolute maximum ratings............................................................................. 5 7. recommended operating conditions ....................................................... 5 8. electrical specifications .............................................................................. 6 9. optical specifications ...................................................................................... 8 10.interface specifications 10-1.signal descriptions ................................................................................................. 13 10-2.color data assignment .......................................................................................... 14 10-3.input signal timing ............................................................................................... 15 10-4.correspondence between data and display position .......................................... 17 10-5.power supply sequence ......................................................................................... 17 11.backlight specifications 11-1.pin configuration for backlight ............................................................................ 18 11-2.ccfl ...................................................................................................................... . 18 11-3.life...................................................................................................................... ..... 18 11-4.lamp assembly set (for replacement) ................................................................. 18 12.appearance specifications 12-1.zone ...................................................................................................................... ... 19 12-2.bright spot.............................................................................................................. 1 9 12-3.test condition......................................................................................................... 19 12-4.standard ................................................................................................................. 1 9 13.environmental specifications .................................................................. 21 14.indications............................................................................................................. 22 15.packaging 15-1.packaging specifications ....................................................................................... 22 15-2.packaging method .................................................................................................. 22 16.warranty................................................................................................................. 27 17.precautions .......................................................................................................... 27 18.precautions for use......................................................................................... 30 19.miscellaneous..................................................................................................... 30 ?u ?u 04 20010706 add 18.,19. ? 2 FLC38XGC6V-06 3 3 edit date appr. check desig. description cust. ccc c ccc ccc c ccc ccc c ccc ccc c ccc c c c c ccc c c c c ccc c c c c ccc c c c c ccc / date document control section :? d d e f b a desig. check appr. FLC38XGC6V-06 tech bes lcd-00050 :? 2 3 4 a b c c 1. applications 1. applications 1. applications 1. applications this specification is applied to the 15.0 in. xga supported tft-lcd module. 2. 2. 2. 2. product name product name product name product name and model number and model number and model number and model number 2-1. product name : lcd module 2-2. model name : FLC38XGC6V-06 3. overview 3. overview 3. overview 3. overview this lcd module has a tft active matrix type liquid crystal panel 1024768 pixels, and diagonal size of 38cm (15.0-inch). this module supports 1024768 xga mode (non-interlace). this lcd has a digital rgb interface and can display 262,144 colors. timing control signal is ?data enable signal : enab? only. (data enable mode) even and odd data are transmitted at the same timing in the interface, so data lines are 36. (r, g, b each 6 bit 2) the signal level of this interface is +3.3v cmos level or 5v ttl level. the power supply of this lcd module is +5v dc single. this module has the characteristics for applying tco?99. 4. configuration 4. configuration 4. configuration 4. configuration this lcd module consists of a lcd panel, lcd driving circuit, control circuit, interface circuit and backlight unit. the lcd panel is active matrix tft type and fujitsu?s unique mva (m ulti-domain v ertical a lignment) liquid crystal technology is adopted in it. the lcd driving circuit is integrated in ic chips, which are bonded on plastic wiring film (hereinafter tab driver-ic), and the output terminals of the ic chips are connected to the lcd panel. the control circuit and the interface circuit are mounted on three kinds of printed circuit board (hereinafter pcb) and the input of the tab driver-ics are connected to the pcbs. with such circuit construction, the image data received by the interface circuit is forwarded to the control circuit and the control circuit modulates the image data to lcd driving signals. the tab driver ics buffer the lcd driving signals and output driving voltages to the lcd panel. these lcd parts such as the lcd panel, the tab-ics and the pcbs are assembled together with the backlight module in a plastic case and a metal frame. fig.4-1 shows a block diagram of this lcd module. 02 20001117 correct 3.overview ?s ? 2 FLC38XGC6V-06 3 4 edit date appr. check desig. description cust. ccc c ccc ccc c ccc ccc c ccc ccc c ccc c c c c ccc c c c c ccc c c c c ccc c c c c ccc / date document control section :? d d e f b a desig. check appr. FLC38XGC6V-06 tech bes lcd-00050 :? 2 3 4 a b c c 5. mechanical specifications 5. mechanical specifications 5. mechanical specifications 5. mechanical specifications table 5-1 shows the mechanical specifications of this lcd module. table 5-1. mechanical specifications item specifications unit remark dimensions 347.3263.515.8(typ.) (excluding i/f connector ? and fixing parts) mm display resolution (10243) 768 ? display dot area 304.1228.1 mm dot pitch (0.0993) 0.297 mm edge type backlight is used. ( 2.6 ccfl4) outward appearance is shown at page 30 and 31. aspect ratio 1 ? : ? 1 ? weight 1,500 max g fg-sg short circuit ? lcd panel interface circuit ? ? dc/dc converter control circuit gate driver data driver inverter backlight (external) enab ro-5 go-5 bo-5 dclk ? v cc (+5v) fig.4-1.block diagram v dd ? 2 FLC38XGC6V-06 3 5 edit date appr. check desig. description cust. ccc c ccc ccc c ccc ccc c ccc ccc c ccc c c c c ccc c c c c ccc c c c c ccc c c c c ccc / date document control section :? d d e f b a desig. check appr. FLC38XGC6V-06 tech bes lcd-00050 :? 2 3 4 a b c c 6. absolute maximum ratings 6. absolute maximum ratings 6. absolute maximum ratings 6. absolute maximum ratings table 6-1 shows the absolute maximum rating of this lcd module. table 6-1. absolute maximum ratings item symbol condition min. typ. max. unit supply voltage v cc ta=25oc -0.3 ? 6.0 v input voltage v in ta=25oc -0.3 ? vcc+0.3 v 7. recommended operating conditions 7. recommended operating conditions 7. recommended operating conditions 7. recommended operating conditions table 7-1 shows the recommended operating conditions of this lcd module. table 7-1. recommended operating conditions item symbol min. typ. max. unit supply voltage (logic) v cc 4.75 5.0 5.25 v ripple voltage v cc v rp ? ? 100 mv ? 2 FLC38XGC6V-06 3 6 edit date appr. check desig. description cust. ccc c ccc ccc c ccc ccc c ccc ccc c ccc c c c c ccc c c c c ccc c c c c ccc c c c c ccc / date document control section :? d d e f b a desig. check appr. FLC38XGC6V-06 tech bes lcd-00050 :? 2 3 4 a b c c 8. electrical specifications 8. electrical specifications 8. electrical specifications 8. electrical specifications table 8-1 shows the electrical specifications of this lcd module. table 8-1. electrical specifications item symbol condition min. typ. max. unit remark supply current i cc ? 380 800 ma *1 ?h? level logic input voltage v ih v cc= +5.00.25v vss=0v dclk=32.505mhz 2.3 ? v cc v ?l? level logic input voltage v il ? 0.9 v leak current (logic input) i il -5 ? +5 a supply rush current i scc ? ? 5.5 a *2 supply rush current duration (1a excess) t scc ? ? 0.4 ms contrast regulation vr r vr 0 ? 100 k ? =50khz, ta=25oc ? 1324 1500 ccfl turn on voltage + ( =50khz, ta=0oc ? 1324 1500 vrms lighting voltage =50khz =7ma 550 580 610 vrms back light lighting frequency =580vrms 40 50 60 khz *4 tube current =50khz v =580vrms 6 7 8 a *4 (*1) typical current value is measured when color bar pattern is displayed at vcc=5.0v. maximum current value is measured when 55/63 and 63/63 gray scale pattern every 2 pixel is displayed at vcc=4.75v. without rush current. (*2) these items prescribe the rush current for starting internal dc/dc. charging current to capacitors of vcc is not prescribed. (*3) backlight specifications are valid when using a suitable inverter such as the ?flcv-07? of fujitsu limited. (*4) tube current (i l ) shows the value of the current that is consumed at one lamp. this lcd module has 4 lamps. each 2 lamps are placed at upper and lower side of the display. 2 lamps are connected in parallel. each low voltage terminals are bound into 1 line cable, which connected to the backlight connector. ? 2 FLC38XGC6V-06 3 7 edit date appr. check desig. description cust. ccc c ccc ccc c ccc ccc c ccc ccc c ccc c c c c ccc c c c c ccc c c c c ccc c c c c ccc / date document control section :? d d e f b a desig. check appr. FLC38XGC6V-06 tech bes lcd-00050 :? 2 3 4 a b c c note 1) measurement circuit based on fig.8-1. fig.8-1. measurement circuit note 2) equivalent circuit based on fig.8-2 (a), (b). fig.8-2 (a) equivalent circuit of logic signal input fuse .................. kab2402202na (matsuo electric co., ltd.) emi filter ........sgm20c1e332-2a(sumitomo metals) fig.8-2 (b) equivalent circuit of power supply logic analog driver dc/dc converte ? +5v gnd ac gnd icc i lcd module vcc v l l emi filter vs fuse (2a) gnd v cc fg frame ground backlight emi filter internal circuit 10 f 10 f 100pf enab ro0~5,re0~5 go0~5,ge0~5 bo0~5,be0~5 dclk input signals emi filter ......... mem2012tc100(tdk) cmos logic signal (internal) ? 2 FLC38XGC6V-06 3 8 edit date appr. check desig. description cust. ccc c ccc ccc c ccc ccc c ccc ccc c ccc c c c c ccc c c c c ccc c c c c ccc c c c c ccc / date document control section :? d d e f b a desig. check appr. FLC38XGC6V-06 tech bes lcd-00050 :? 2 3 4 a b c c 9. optical specifications 9. optical specifications 9. optical specifications 9. optical specifications table 9-1 shows the optical specifications of this lcd module. table 9-1. optical specifications ta=25o c specifications remark item symbol condition min. typ. max unit note horizontal l,r u,d =0o 80 ? ? deg visual angle vertical u,d cr 10 l,r =0o 80 ? ? deg (1)(2) (3)(5) (6) contrast ratio cr l,r,u,d =0o 210 400 ? ? white/ black (1)(2) (3)(5) ta=25oc ? 15 30 ms response time(on) (b w) t on l,r, u,d =0o ta=0oc ? 50 100 ms ta=25oc ? 10 25 ms response time(off) (w b) t off l,r, u,d =0o ta=0oc ? 50 100 ms (1) (4) (5) brightness i 200 250 ? cd/m 2 (1)(5) brightness uniformity ? i 80 ? ? % (1)(5) (7) x 0.283 0.313 0.343 ? chromaticity w y l,r,u,d =0o v cc =5v, i l =7ma (at maximum brightness) 0.299 0.329 0.359 ? white *1 r red ? (0.646, 0.350) typ. g green ? (0.310, 0.593) typ. b (x, y) white ? (0.153, 0.152) typ. (1) (5) lcd panel type tft color display mode normally black va wide viewing angle technology mva optimum viewing angle ? (symmetry) (6) display color 262,144 (6-bit color) color of non-display area black surface treatment anti-glare (haze value:25%, 2h) (*1) value at 15~20 minutes after lighting on. (note) cs-1000 (minolta co., ltd.) , bm-5a(topcon) or equivalent luminance colorimeter should be used for the measurement. field=2o, l=500mm the specified value of viewing angle, contrast, brightness, brightness uniformity and chromaticity are under the dark room condition (1lux or less). 04 20010706 revised chromaticity of r, g, b ? 2 FLC38XGC6V-06 3 9 edit date appr. check desig. description cust. ccc c ccc ccc c ccc ccc c ccc ccc c ccc c c c c ccc c c c c ccc c c c c ccc c c c c ccc / date document control section :? d d e f b a desig. check appr. FLC38XGC6V-06 tech bes lcd-00050 :? 2 3 4 a b c c 0 20 40 60 80 :? 00 0 8 16 24 32 40 48 56 64 gray scale level brightness ratio [%] fig.9-1. -curve (reference value) =2.20(typ.) ? 2 FLC38XGC6V-06 3 10 edit date appr. check desig. description cust. ccc c ccc ccc c ccc ccc c ccc ccc c ccc c c c c ccc c c c c ccc c c c c ccc c c c c ccc / date document control section :? d d e f b a desig. check appr. FLC38XGC6V-06 tech bes lcd-00050 :? 2 3 4 a b c c note 1) definition of viewing angle (1) based on fig.9-2. * u =0o, d =0o, l =0o, r =0o fig.9-2. definition of viewing angle (1) note 2) definition of viewing angle (2) based on fig.9-3. fig.9-3. definition of viewing angle (2) note 3) definition of contrast ratio (cr) determined by formula (1) based on fig.9-4.voltage-brightness characteristics. l w (brightness at white) = -------- (1) l b (brightness at black) 0 fig.9-4. voltage-brightness characteristics *0o ( front ) u ? ? ? y + top (12 o?clock direction) lcd module x ? left (9 o?clock direction) y ? bottom (6 o?clock direction) x + right (3 o?clock direction) d l r display surface display surface max typ min l,r,u,d =0o panel drive voltage [v] brightness | l white l 0 black l , ? 2 FLC38XGC6V-06 3 11 edit date appr. check desig. description cust. ccc c ccc ccc c ccc ccc c ccc ccc c ccc c c c c ccc c c c c ccc c c c c ccc c c c c ccc / date document control section :? d d e f b a desig. check appr. FLC38XGC6V-06 tech bes lcd-00050 :? 2 3 4 a b c c note 4) definition of response time based on fig.9-5. on off 100% 0% fig.9-5. definition of response time note 5) contrast ratio and response measurement system based on fig.9-6. fig.9-6. contrast ratio and response time measurement system drive signal of lcd panel non-select status select status non-select status relative brightness black t on t off 90% 10% on response time off response time drive and measurement system y + y ? x + z + z ? x ? brightness meter or luminance colorimeter (with luminosity correction function) black white ? 2 FLC38XGC6V-06 3 12 edit date appr. check desig. description cust. ccc c ccc ccc c ccc ccc c ccc ccc c ccc c c c c ccc c c c c ccc c c c c ccc c c c c ccc / date document control section :? d d e f b a desig. check appr. FLC38XGC6V-06 tech bes lcd-00050 :? 2 3 4 a b c c note 6) definition of optimum viewing angle based on fig.9-7. fig.9-7. definition of viewing angle note 7) definition of brightness uniformity brightness uniformity is defined by the following formula. brightness (i1~i9) art measured at the following 9 points ( 1 ~ 9 ) on the display area shown in fig.9-8. |min. in| brightness uniformity ( ? l) = 100 (%), n=1 to 9 |max. in| 153 512 871 1 4 7 115 2 5 8 384 3 6 9 653 note) each measurement point ( 1 ~ 9 ) defines the center spot of brightness meter view. the tolerance of measurement position is 5mm. fig.9-8. measurement points 10 (-) (+) 0 6 o?clock viewing angle 12 o?clock max contrast ratio ? 2 FLC38XGC6V-06 3 13 edit date appr. check desig. description cust. / date document control section 1 d d e f b a desig. check appr. FLC38XGC6V-06 tech bes lcd-00050 1 2 3 4 a b c c 10. interface specifications 10. interface specifications 10. interface specifications 10. interface specifications 10-1. signal descriptions table 10-1 shows the description and configuration of interface signals (cn1). table 10-1. interface signals (cn1) pin = symbol i/o function pin = symbol i/o function 1 gnd ? ground 31 go1 c green odd data 1 2 re0 c red even data 0 32 go2 c green odd data 2 3 re1 c red even data 1 33 go3 c green odd data 3 4 re2 c red even data 2 34 go4 c green odd data 4 5 re3 c red even data 3 35 go5 c green odd data 5 6 re4 c red even data 4 36 gnd ? ground 7 re5 c red even data 5 37 bo0 c blue odd data 0 8 gnd ? ground 38 bo1 c blue odd data 1 9 ge0 c green even data 0 39 bo2 c blue odd data 2 10 ge1 c green even data 1 40 bo3 c blue odd data 3 11 ge2 c green even data 2 41 bo4 c blue odd data 4 12 ge3 c green even data 3 42 bo5 c blue odd data 5 13 ge4 c green even data 4 43 gnd ? ground 14 ge5 c green even data 5 44 pull c ( *2 ) 15 gnd ? ground 45 pull c ( *2 ) 16 be0 c blue even data 0 46 enab c data enable si g nal 17 be1 c blue even data 1 47 gnd ? ground 18 be2 c blue even data 2 48 gnd ? ground 19 be3 c blue even data 3 49 dclk c dot clock si g nal 20 be4 c blue even data 4 50 gnd ? ground 21 be5 c blue even data 5 51 gnd ? ground 22 gnd ? ground 52 ss ? ss function on/off ( *1 ) 23 ro0 c red odd data 0 53 n.c. ? ? 24 ro1 c red odd data 1 54 gnd ? ground 25 ro2 c red odd data 2 55 gnd ? ground 26 ro3 c red odd data 3 56 gnd ? ground 27 ro4 c red odd data 4 57 vdd ? +5v power su pp l y 28 ro5 c red odd data 5 58 vdd ? +5v power su pp l y 29 gnd ? ground 59 vdd ? +5v power su pp l y 30 go0 c green odd data 0 60 vdd ? +5v power su pp l y (*1) ss (s pread s pectrum):ss function is on when signal level is high or n.c..(generally set up n.c.) ss function is off when signal level is low. (*2).connect it to gnd for the protection of internal circuit. upper side interface connector lcd module rear side 31 30 lower side connector : 52760-0600 (molex) user?s connector : 53475-0600 (molex) 60 1 ? 2 FLC38XGC6V-06 3 14 edit date appr. check desig. description cust. / date document control section 1 d d e f b a desig. check appr. FLC38XGC6V-06 tech bes lcd-00050 1 2 3 4 a b c c 10-2. color data assignment table 10-2 shows the color data assignment. table 10-2. color data assignment color r input data g input data b input data odd r05 r04 r03 r02 r01 r00 g05 g04 g03 g02 g01 r00 b05 b04 b03 b02 b01 b00 even re5 re4 re3 re2 re1 re0 ge5 ge4 ge3 ge2 ge1 ge0 be5 be4 be3 be2 be1 be0 black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 green 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 cyan 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 red 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 magenta 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 yellow 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 basic color white 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 ? brighter 61 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 ? 62 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 red red 63 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 ? brighter 61 0 0 0 0 0 0 1 1 1 1 0 1 0 0 0 0 0 0 ? 62 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 green green 63 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 ? brighter 61 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1 ? 62 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 blue blue 63 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 note.1) definition of gray scale : color (n) ---?n? indicates gray scale level. the gray scale is brighter as the number is larger. note.2) data; 1: high, 0: low note.3) color data consist of 36 bits, namely, 6-bit odd and even data for each red, green and blue. optional data can be set to red, green and blue independently. therefore, the module is able to display 262,144 colors. ? 2 FLC38XGC6V-06 3 15 edit date appr. check desig. description cust. / date document control section 1 d d e f b a desig. check appr. FLC38XGC6V-06 tech bes lcd-00050 1 2 3 4 a b c c 10-3. input signal timing table 10-3 and fig.10-3 shows the input signal timing. table 10-3. timing characteristics (t=0~50o c , vcc=50.25v) item symbol min. typ. max. unit remark dclk signal period tc 25.000 30.764 40.000 ns (clock) frequency fc 25.000 32.505 40.000 mhz fc=1/tc duty tch/tc 45 50 55 b? *1 high time tclkh 5.0 ? ? ns low time tclkl 5.0 ? ? ns rise time tclkr ? ? 5.0 ns fall time tclkf ? ? 5.0 ns dclk-data setup time tset 4.5 ? ? ns 40mhz timing hold time thold 6.5 ? ? ns 40mhz horizontal period th 565 672 1566 dclk fh=1/th frequency fh 38.6 48 60 khz display period thd ? 512 ? dclk *2,3 ve rti cal period tv 772 806 868 th 16.67ms frequency fv 50 60 75 hz display period tvd ? 768 ? th *2,3 data-enab timing data-enab timing ? ? 0 ? dclk *4 *1) dclk signal input must be valid while power supply is applied. *2) display position is specified by the enab signal. b? horizontal display position is specified by the rise of enab signal. the data of a horizontal line, which is latched by the falling edge of 1st dclk right after the rise of enab, is displayed on the left edge of the screen. b? vertical display position is specified by the rise of enab after a ?low? level period equivalent to eight times of horizontal period. the 1st data corresponding to one horizontal line after the rise of enab is displayed at the top line of screen. *3) if a period of enab ?high? is less than 512 dclk or less than 768 lines, the rest of the screen displays black. *4) the display position does not fit to the screen if the enab period and the effective data period do not synchronize with each other. ? 2 FLC38XGC6V-06 3 16 edit date appr. check desig. description cust. / date document control section 1 d d e f b a desig. check appr. FLC38XGC6V-06 tech bes lcd-00050 1 2 3 4 a b c c dclk ? ? ? enab ro5-5, re5-0 go5-0, ge5-0 bo5-0, be5-0 ? ? ? ro5-0, re5-0 go5-0, ge5-0 bo5-0, be5-0 enab ro5-0, re5-0 go5-0, ge5-0 bo5-0, be5-0 enab dclk ro5-0, re5-0 go5-0, ge5-0 bo5-0, be5-0 enab fig.10-3.input signal timing chart tch tc tc1 tset thol 1.65v 2.3v 0.9v tclk tclkl tclkr tclkf 2.3v 0.9v 1019 tc tdn=0clk tdn=0clk 0001 0003 0005 0002 0004 0006 0007 0008 0009 0010 0011 0012 1011 1013 1015 1017 1021 1023 1012 1014 1016 1018 1020 1022 1024 c001 c768 tv tv th th ? 2 FLC38XGC6V-06 3 17 edit date appr. check desig. description cust. / date document control section 1 d d e f b a desig. check appr. FLC38XGC6V-06 tech bes lcd-00050 1 2 3 4 a b c c 10-4. correspondence between data and display position fig.10-3 shows the correspondence between data and display position . ? ? ro 0001 go 0001 bo 0001 re 0002 ge 0002 be 0002 ro 0003 go 0003 ge 1024 be 1024 ro 0001 go 0001 bo 0001 re 0002 ge 0002 be 0002 ro 0003 go 0003 ge 1024 be 1024 fig.10-4.correspondence data and display position 10-5. power supply sequence the sequence of input signals and on/off of the power supply of this lcd module should be in the specification shown in fig.10-4 to prevent latch-up of the driver ics and dc driving of the lcd panel. fig.10-5. power supply sequence s0001 s0002 s0003 s0004 s0005 s0006 s0007 s0008 s3071 s3072 c001 c768 v cc 10% n? n? t5< 20ms(voltage descent) 10ms< t1< 40ms 10ms< t2< 40ms 0ms< t3< 40ms t1 t2 4.75v 4.75v (4.5v) t4< 20ms 4.75v 90% 10% 4.75v 0.5v 0.1s< t6 n? n? on off (0v) h l input signal ? 2 FLC38XGC6V-06 3 18 edit date appr. check desig. description cust. / date document control section 1 d d e f b a desig. check appr. FLC38XGC6V-06 tech bes lcd-00050 1 2 3 4 a b c c 11. backlight specifications 11. backlight specifications 11. backlight specifications 11. backlight specifications ? ? ? ? 11-1. pin configuration for backlight table 11-1(a) and 11-1(b) shows the description and pin assignment of the connectors (cn-a and b) for the backlight of this lcd module. table 11-1(a) pin assignment of cn-a table11-1(b) pin assignment of cn-b ? ? ? ? pin o signal function pin o signal function 1 v l 1 power supply for ccfl 1 1 v l 3 power supply for ccfl 3 2 v l 2 power supply for ccfl 2 2 v l 4 power supply for ccfl 4 3 nc ?? 3 nc ?? 4 gnd ground (for v l 1, 2) 4 gnd ground (for v l 3, 4) ? cable color (cn-a and b) : white at gnd, pink at v l 1,2,3 and 4 connector : housing : bhr-04vs-1 : contact : sbh-001t-p0.5 user?s connector : post with base : sm04(4.0)b-bhs-1-tb supplier : japan solderless terminal trading company ltd. (j.s.t.) ? ? 11-2. ccfl supplier : sanken electric co., ltd part no. kfn8319f315296z 11-3. life the life of the backlight is a minimum of 50,000 hours at the following conditions. (1) working conditions ? ambient temperature : 25 :? 5o c ? tube current(i l ) : (7ma or less) (2) definition of life ? brightness becomes 50% or below 50% of the minimum brightness value shown in table 9-1. ? the lamp cannot be lit by the breakdown voltage of 1500vvms. ? lamp is flashing. 11-4. lamp assembly set (for replacement) lamp assembly set (with charge) is prepared for maintenance. this set consists of an upper lamp assembly and a lower lamp assembly. type number : flcl-16s (for upper and lower) ? 2 FLC38XGC6V-06 3 19 edit date appr. check desig. description cust. nlnan^n^nm / date document control section 1 d d e f b a desig. check appr. FLC38XGC6V-06 tech bes lcd-00050 1 2 3 4 a b c c 12. appearance specif 12. appearance specif 12. appearance specif 12. appearance specifications ications ications ications 12-1. zone b? inside display dot area (304.1 228.1mm) b? display dot area means active area. b? one pixel consists of 3 dots (red, green and blue). b? foreign particle and scratch unharmful to display image, such as the foreign particle under polarizer film but outside of the display area and scratch on metal bezel, backlight module or polarizer film out of the display area, etc., are not counted. 12-2. bright spots (1) bright spots by the defect of tft. visible under bias of 2% nd filter ................................ high bright spot rg visible under 5% but invisible under 2% nd filter ..... low bright spot rgb invisible under bias of 5% nd filter ............................. not counted (2) bright spots by the light passing through tears, breaks, etc in color filter. exceed size of a half dot ................................................. high bright spot a half dot or less ............................................................. not counted (3) bright spots by the light passing through tears, breaks, etc in chromium mask. exceed 50 m ................................................................... high bright spot 50 m or less ................................................................... not counted 12-3. test condition b? inspector must observe the lcd screen from the normal direction under the illumination by a single 20w fluorescent lamp. the distance between the lcd screen and the inspector should be a height of 50cm above the worktable. the vertical illuminance is 300 to 600lux (reference value). b? bright spot should be counted under entire black screen. b? dark spot should be counted under entire white screen. b? frame frequency should be 60hz. 12-4. specifications table 12-4 shows the appearance standard. (note1) please do not mistake a single bright spot for a bright spot connection due to cs(supplemental capacitance) line at the center of each dot. (note2) if a pixel is dark partially, it connects into the number of dark spots in accordance with following rule. (a) s<1/3 : not count. only one of 4 dark connection is allowed. (b) 1/3< s<2/3 : considered as 0.5 dot. (c) 2/3< s : considered as 1 dot. (s=dark spot size/dot size) ? 2 FLC38XGC6V-06 3 20 edit date appr. check desig. description cust. nlnan^n^nm / date document control section 1 d d e f b a desig. check appr. FLC38XGC6V-06 tech bes lcd-00050 1 2 3 4 a b c c table 12-4. appearance specifications no. item ? jud g ment method and standard ? 1 bright spot (high and low) < 3 dots (note 1 ) 2 bright spot connection (high and low) < 1 pair (note 1) (2 dot connection in horizontal only) 3 total of bright spot < 3 dots 4 dark spot < 6 dots (note 2) 5 dark spot connection < 3 pairs (note 2) (2 dot connection in horizontal only) 6 total of dark spot < 6 dots (note 2) 7 total of dot defect (bright and dark) < 6 dots 8 high-hgh > 15mm distance of bright spot others > 5mm 9 distance of dark spot > 5mm w< 0.03 ???? ignore l< 6 ignore 6 ? 2 FLC38XGC6V-06 3 22 edit date appr. check desig. description cust. / date document control section 1 d d e f b a desig. check appr. FLC38XGC6V-06 tech bes lcd-00050 1 2 3 4 a b c c 14. indications 14. indications 14. indications 14. indications this module has the following indications. ? (1) product name : lcd unit (2) model number : FLC38XGC6V-06 (3) product drawing number : na19020-c281 or na19020-c291 (4) manufacturing number : 8 y 0 0 0 0 1 (5) version number : 01a (example) -1st 2 digits ?01? means operational version. -3rd alphabet means functional version. (6) country of origin : made in japan (na19020-c281) made in taiwan(na19020-c291) (7) company name : fujitsu limited (8) disposal method of cold-cathode tubes. (see fig.14-1) (9) caution when changing cold-cathode tubes. (see fig. 14-2) 15. packaging 15. packaging 15. packaging 15. packaging separately specified in packaging specifications. 15-1. packaging specifications (1) 5 lcd modules / 1 package. (2) weight: approximately 10kg / 1 package. (3) outline dimensions : 353mm (w)268mm (d) 462mm (h) 15-2. packaging method fig.15-2 (a),(b),(c),(d) show the packing method. serial number (to be reset every month on 1st.) manufacturing month (oct. = x, nov. =y, dec. =z) last digit of manufacturing year. ? this tft color lcd contains cold cathode fluorescent lamps. please follow local ordinances or regulations for its disposal. ? ????????? w?Mz???? ???t?? ? when changing cold cathode fluo- rescent lamps, follow operating specifications. especially be careful bout the lamps side-edge. ? w?QI?? ??w?? ???? ? ? ? ? ? ? ? ? fig.14-1 fig.14-2 lcd unit lcd unit lcd unit lcd unit FLC38XGC6V-06 0x500 1 5 na 1 9020-c28 1 0 1 a made in japan/fujitsu limited fig.14-3 product label (example) 03 20010109 correct 15-1(3) ? 2 FLC38XGC6V-06 3 23 edit date appr. check desig. description cust. / date document control section 1 d d e f b a desig. check appr. FLC38XGC6V-06 tech bes lcd-00050 1 2 3 4 a b c c fig.15-2(a) packaging method protective sheet front side rear side front side anti-electric bag tape ? 2 FLC38XGC6V-06 3 24 edit date appr. check desig. description cust. / date document control section 1 d d e f b a desig. check appr. FLC38XGC6V-06 tech bes lcd-00050 1 2 3 4 a b c c fig.15-2(b) packaging method holder(bottom) lcd unit holder(upper) label(example) (type) FLC38XGC6V-06 (qty.) 5 na19020-c281 01a (drwg. no.) (rev. no.) 9x00001 9x00002 9x00003 9x00004 9x00005 `` made in japan taping upper : h or i method bottom : h method upper and bottom holders should be anti-electrostatic t yp e. (268) (462) (353) 03 20010109 correct package size ? 2 FLC38XGC6V-06 3 25 edit date appr. check desig. description cust. / date document control section 1 d d e f b a desig. check appr. FLC38XGC6V-06 tech bes lcd-00050 1 2 3 4 a b c c note:1) 8 boxes4 layers (maximum 32 boxes) : by ship 8 boxes3 layers (maximum 24 boxes) : by airplane note:2) this drawing shows marine transportation specification. fig.15-2(c) packaging method upper board wrap film up and down : 3 times wrap middle : 2 times wrap corrugated carton pp belt carton angle 1980(by ship) 1520 ( b y air p lane ) (900) (900) ? 2 FLC38XGC6V-06 3 26 edit date appr. check desig. description cust. / date document control section 1 d d e f b a desig. check appr. FLC38XGC6V-06 tech bes lcd-00050 1 2 3 4 a b c c note 1) the carton (a) should be placed in the middle of the container(b) with enough cushioning materials. note 2) the figures in ( ) show inside measurements of the container(b). figure.15-2(d) packaging method 496 (480) 616 (600) cushioning material corrugated carton(a) with lcd modules corrugated fiberboard shipping container(b) 617 (585) ? 2 FLC38XGC6V-06 3 27 edit date appr. check desig. description cust. / date document control section 1 d d e f b a desig. check appr. FLC38XGC6V-06 tech bes lcd-00050 1 2 3 4 a b c c 16. warranty 16. warranty 16. warranty 16. warranty the warranty period is one year after manufacturing. products which fail during this period are repaired or replaced without charge, unless the failure is caused by user. 17. precautions 17. precautions 17. precautions 17. precautions adhere to the following precautions to properly use this lcd module. (1) fail safe design (1) fail safe design (1) fail safe design (1) fail safe design lcd module has an inherent chance of failure. customers must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. (2) handling of lcd panel (2) handling of lcd panel (2) handling of lcd panel (2) handling of lcd panel ? ? ? ? do not apply any strong mechanical shock to the lcd panel. do not apply any strong mechanical shock to the lcd panel. do not apply any strong mechanical shock to the lcd panel. do not apply any strong mechanical shock to the lcd panel. since the lcd panel is made of glass, excessive shock may damage the panel or cause a malfunction. ? ? ? ? do not press hard on the do not press hard on the do not press hard on the do not press hard on the lcd panel surface. lcd panel surface. lcd panel surface. lcd panel surface. in the lcd panel, the gap between two glass plates is kept precisely and uniformly to maintain display?s characteristics and reliability. if this panel is pressed hard, the following troubles occurs. (a) ununiformity of color (b) orientation of liquid crystal becomes disordered problem (a) returns to normal after a while. problem (b) returns to normal if power is shut off once then turned on again. however these operations should be avoided to insure reliability. ? ? ? ? do not scratch the polar do not scratch the polar do not scratch the polar do not scratch the polarizer film on the lcd panel surface. izer film on the lcd panel surface. izer film on the lcd panel surface. izer film on the lcd panel surface. do not press or rub the display surface with a hard tool, pincet, etc. for handling, use cotton or conductive gloves so that the display surface is not stained. for if the display surface is stained by dust or dirt, clean it as follows with a soft cloth ? (deer skin, etc.) [dust] wipe off with a soft cloth. (do not rub.) [dirt ] wipe off lightly with a soft cloth after soaking in the clear water and squeezing hard out of water drops. only if the dirt is hardly wiped off, use isopropyl alcohol or ethanol. be careful not to splash the water or the solvent and water penetrated between the polarizer and the lcd panel. do not use solvents such as ketone (acetone, etc.) and aromatics (xylene, toluene, etc.) if saliva or water drops are left for long time, it may deform partial deformation or discolored. ? wipe off immediately in the same way as for dirt. do not allow oil to adhere to the module, since the cleaning of oil is difficult. ? ? ? ? ? ? ? ? do not place or contact objects on the display surface for a long period o do not place or contact objects on the display surface for a long period o do not place or contact objects on the display surface for a long period o do not place or contact objects on the display surface for a long period of time. f time. f time. f time. that?s because this may make some parts of the lcd module distorted and the display quality may decline. 04 20010706 add 17.(1) ? 2 FLC38XGC6V-06 3 28 edit date appr. check desig. description cust. / date document control section 1 d d e f b a desig. check appr. FLC38XGC6V-06 tech bes lcd-00050 1 2 3 4 a b c c (3) handling of lcd module (3) handling of lcd module (3) handling of lcd module (3) handling of lcd module ? ? ? ? do not pull the cold do not pull the cold do not pull the cold do not pull the cold- - - -cathode tube cable strongly. cathode tube cable strongly. cathode tube cable strongly. cathode tube cable strongly. if the cable is pulled with the loaf of 2kg or more, the cable may be damaged or reliability may decrease. ? ? ? ? assemble the module assemble the module assemble the module assemble the module into into into into user user user user? ?? ?s system s system s system s system in in in in a dust free environment. a dust free environment. a dust free environment. a dust free environment. if conductive foreign matter adheres to the module, failures may occur. ? ? ? ? take anti take anti take anti take anti- - - -static measures for assembling the module. static measures for assembling the module. static measures for assembling the module. static measures for assembling the module. since the lcd module contains cmos-ics, the following considerations are necessary. for assembling the module, operator should be grounded and wear cotton or conductive ? gloves. floor of work area and work table to assemble the lcd module should be covered with electrostatic shielding in order to discharge static electricity via an earth wire. if necessary, ground operation tools (soldering iron, radio pliers, pincet, etc.). do not take the module out of the conductive bag until the time when the module is assembled. assemble the module under low humidity (50%rh or less). ? ? ? ? do not pull the connecting cable on the rear face of the lcd module strongly. do not pull the connecting cable on the rear face of the lcd module strongly. do not pull the connecting cable on the rear face of the lcd module strongly. do not pull the connecting cable on the rear face of the lcd module strongly. ? ? ? ? do not disassemble or remodel the lcd module. do not disassemble or remodel the lcd module. do not disassemble or remodel the lcd module. do not disassemble or remodel the lcd module. if this lcd module is disassembled or remodeled, it may have some trouble, or the display quality and reliability may not be assured. (4) precautions for operating the lcd module (4) precautions for operating the lcd module (4) precautions for operating the lcd module (4) precautions for operating the lcd module ? ? ? ? ? ? ? ? adhere to the specified power supply sequence. adhere to the specified power supply sequence. adhere to the specified power supply sequence. adhere to the specified power supply sequence. if not followed, the cmos-ic may cause a latch-up, or the dc voltage may be applied the liquid crystal, and a failure or serious deterioration in display quality may occur. ? ? ? ? ? ? ? ? do not operate the lcd module when condensation do not operate the lcd module when condensation do not operate the lcd module when condensation do not operate the lcd module when condensation is is is is present. present. present. present. if the lcd module is operated when condensation is on the terminals of the lcd panel, the terminals cause electrochemical reaction, and may reach disconnection. condensation easily occurs especially when the module is moved from a cold environment to a warm environment. ? ? ? ? ? ? ? ? trouble that occurs when the lcd module trouble that occurs when the lcd module trouble that occurs when the lcd module trouble that occurs when the lcd module is is is is used at not recommended temperature. used at not recommended temperature. used at not recommended temperature. used at not recommended temperature. operation at high temperature(>50oc) :display colors shift to blue. storage at high temperature (>60oc) :the polarizer film deteriorates and contras decreases. operation at low temperature (<0oc) :the response speed decreases considerably. storage at low temperature (<-20oc) :the liquid crystal may solidify and become damaged. ? ? ? ? ? ? ? ? always always always always input input input input the control signals at the correct timing. the control signals at the correct timing. the control signals at the correct timing. the control signals at the correct timing. if control signals (dclk, or enab) are not input, or if the timing is out of the specified timing, dc voltage may be applied to the liquid crystal and, as a result, cause image sticking or deterioration of contrast. ? 2 FLC38XGC6V-06 3 29 edit date appr. check desig. description cust. / date document control section 1 d d e f b a desig. check appr. FLC38XGC6V-06 tech bes lcd-00050 1 2 3 4 a b c c (5) precautions on designing module mounting (5) precautions on designing module mounting (5) precautions on designing module mounting (5) precautions on designing module mounting ? ? ? ? do not press the display surface and bottom face of the lcd module. do not press the display surface and bottom face of the lcd module. do not press the display surface and bottom face of the lcd module. do not press the display surface and bottom face of the lcd module. display quality or reliability may be deteriorated if the installation of the lcd module is inappropriate and, as a result, excessive pressure is applied to the surface of lcd screen. brightness uniformity or the reliability of ccfl may decrease if the pressure is applied to the backlight module. ? ? ? ? cons cons cons consider the module mounting design, so that twisting and bending do not occur to the ider the module mounting design, so that twisting and bending do not occur to the ider the module mounting design, so that twisting and bending do not occur to the ider the module mounting design, so that twisting and bending do not occur to the ? ? ? ? lcd module. lcd module. lcd module. lcd module. excessive twisting and bending may damage display quality and reliability. ? ? ? ? the power cable length between the lcd module and inverter should not be extended. the power cable length between the lcd module and inverter should not be extended. the power cable length between the lcd module and inverter should not be extended. the power cable length between the lcd module and inverter should not be extended. otherwise the backlight may not light or flickering may occur. ? ? ? ? do not make the powe do not make the powe do not make the powe do not make the power cable of the backlight clung to a metal plate, etc. r cable of the backlight clung to a metal plate, etc. r cable of the backlight clung to a metal plate, etc. r cable of the backlight clung to a metal plate, etc. backlight frequency current for backlight driving may leak to the metal and desired brightness may not be assured. ? ? ? ? when mounting lcd module with m4 screw (x4) should be screw up under 5.75kgf torque. when mounting lcd module with m4 screw (x4) should be screw up under 5.75kgf torque. when mounting lcd module with m4 screw (x4) should be screw up under 5.75kgf torque. when mounting lcd module with m4 screw (x4) should be screw up under 5.75kgf torque. (6) storage method (6) storage method (6) storage method (6) storage method ? ? ? ? do not store the lcd module do not store the lcd module do not store the lcd module do not store the lcd module in in in in an an an an atmosphere atmosphere atmosphere atmosphere of organic solvent or corrosive gas. of organic solvent or corrosive gas. of organic solvent or corrosive gas. of organic solvent or corrosive gas. in an organic solvent atmosphere, the polarizer film discolors and display quality deteriorates. in a corrosive gas environment, various problems may occur. ? ? ? ? store the lcd module in a fujitsu package. store the lcd module in a fujitsu package. store the lcd module in a fujitsu package. store the lcd module in a fujitsu package. at storing, fujitsu packages can be stacked up to 4 boxes. the lcd module is in an anti-static bag. keep the module in that status. ? ? ? ? i i i it t t t is is is is recommended that the storage environment should be humidity controlled recommended that the storage environment should be humidity controlled recommended that the storage environment should be humidity controlled recommended that the storage environment should be humidity controlled, cool and , cool and , cool and , cool and ? ? ? ? dark. dark. dark. dark. recommended storage environment place ? ? ? ? :dark (avoid direct sunlight) temperature : 10~35oc humidity : 50~60%rh note) if the module is left in an environment of 60 ? or more for a long period of time, optical characteristics may deteriorate. (7) others (7) others (7) others (7) others ? ? ? ? if the lcd panel if the lcd panel if the lcd panel if the lcd panel is is is is damaged, do not inhale or allow the liquid crystal to enter the mouth damaged, do not inhale or allow the liquid crystal to enter the mouth damaged, do not inhale or allow the liquid crystal to enter the mouth damaged, do not inhale or allow the liquid crystal to enter the mouth if the liquid crystal contacts the body or cloths, wash it off with soap immediately. follow precautions for regular electronic components. ? ? ? ? solder flu solder flu solder flu solder flux on the printed circuit board is harmless to the quality and reliability of lcd x on the printed circuit board is harmless to the quality and reliability of lcd x on the printed circuit board is harmless to the quality and reliability of lcd x on the printed circuit board is harmless to the quality and reliability of lcd ? ? ? ? ? ? ? ? module. module. module. module. fujitsu is practicing non-wash technology on module assembly process. ! ! ! ! 04 20010706 revised 17(7) ? 2 FLC38XGC6V-06 3 30 edit date appr. check desig. description cust. / date document control section 1 d d e f b a desig. check appr. FLC38XGC6V-06 tech bes lcd-00050 1 2 3 4 a b c c 18. precautions for use 18. precautions for use 18. precautions for use 18. precautions for use this product is designed, developed and manufactured as contemplated for general use, including without limitation, general office use, personal use, household use, and ordinary industrial use, but is not designed, developed and manufactured as contemplated for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could lead directly to death, personal injury, severe physical damage or other loss (hereinafter ?high safety required use?), including without limitation, nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system. if customer?s product possibly falls under the category of high safety required use, please consult with our sales representatives in charge before such use. in addition, fujitsu shall not be liable against the customer and/or any third party for any claims or damages arising in connection with the high safety required use of the product without permission. 19. miscellaneous 19. miscellaneous 19. miscellaneous 19. miscellaneous specifications of the tft-lcd panel and other components used in the lcd module are subject to change. both parties shall discuss together before change. if any doubt is raised in the content of the specifications, both parties shall discuss and make best effort for the agreement. 04 20010706 add 18, 19 |
Price & Availability of FLC38XGC6V-06
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |